Home/B.Tech. – Bachelor of Technology/ECE - Electronics and Communication Engineering/Page 3
Query Karo
  • -1
Query KaroQK#001
Asked: November 5, 2021In:
  • -1

Read less
  1. nagraju
    nagraju Silver

    A forward bias has a substantial forward current, while a reverse bias has a minimal forward current. ... Forward bias decreases a diode's resistance, and reverse bias increases a diode's resistance. The current flows effortlessly while in forward bias, but reverse bias does not permit current to flRead more

    A forward bias has a substantial forward current, while a reverse bias has a minimal forward current. … Forward bias decreases a diode’s resistance, and reverse bias increases a diode’s resistance. The current flows effortlessly while in forward bias, but reverse bias does not permit current to flow through the diode.

    See less
    • 0
Query Karo
  • 0
Query KaroQK#001
Asked: November 5, 2021In:
  • 0

 

  •  
Read less
  1. nagraju
    nagraju Silver

    Hint: Drift current is the electric current due to the movement of charge carriers under the impact of an outer electric field, while diffusion current is the electric current due to the distribution of carriers, pointing to a change in carrier collection.

    Hint: Drift current is the electric current due to the movement of charge carriers under the impact of an outer electric field, while diffusion current is the electric current due to the distribution of carriers, pointing to a change in carrier collection.

    See less
    • 0
Query Karo
  • 0
Query KaroQK#001
Asked: November 5, 2021In:
  • 0

Read less
  1. nagraju
    nagraju Silver

    An important characteristic of linear systems is how they behave with sinusoids, a property we will call sinusoidal fidelity: If the input to a linear system is a sinusoidal wave, the output will also be a sinusoidal wave, and at exactly the same frequency as the input

    An important characteristic of linear systems is how they behave with sinusoids, a property we will call sinusoidal fidelity: If the input to a linear system is a sinusoidal wave, the output will also be a sinusoidal wave, and at exactly the same frequency as the input

    See less
    • 0
Query Karo
  • 0
Query KaroQK#001
Asked: November 5, 2021In:
  • 0

Read less
  1. nagraju
    nagraju Silver

    A latch-up is a type of short circuit which can occur in an integrated circuit. More specifically it is the inadvertent creation of a low-impedance path between the power supply rails of a MOSFET circuit

    A latch-up is a type of short circuit which can occur in an integrated circuit. More specifically it is the inadvertent creation of a low-impedance path between the power supply rails of a MOSFET circuit

    See less
    • 0
Query Karo
  • 0
Query KaroQK#001
Asked: November 5, 2021In:
  • 0

(more…)

Read less
  1. Nani Reddy
    Nani Reddy Bronze

    Digital Modulation is used for the transmissions of the digital signals over analog baseband. Analog Modulation is used to transfer the low bandwidth signals such as TV or radio signals over a higher bandwidth. Modern modulation techniques are widely used to carry out FDM, that is, Frequency DivisioRead more

    Digital Modulation is used for the transmissions of the digital signals over analog baseband. Analog Modulation is used to transfer the low bandwidth signals such as TV or radio signals over a higher bandwidth. Modern modulation techniques are widely used to carry out FDM, that is, Frequency Division Multiplexing.

    See less
    • 0
Query Karo
  • 0
Query KaroQK#001
Asked: November 5, 2021In:
  • 0

Read less
  1. Nani Reddy
    Nani Reddy Bronze

    Techopedia Explains Network Management System (NMS) Network device monitoring. Network performance analysis. Network device management. Intelligent notifications, or customizable alerts.

    Techopedia Explains Network Management System (NMS)

    Network device monitoring. Network performance analysis. Network device management. Intelligent notifications, or customizable alerts.

    See less
    • 0
Query Karo
  • 0
Query KaroQK#001
Asked: November 5, 2021In:
  • 0

Read less
  1. Nani Reddy
    Nani Reddy Bronze

    In physics, electromagnetic radiation consists of waves of the electromagnetic field, propagating through space, carrying electromagnetic radiant energy. It includes radio waves, microwaves, infrared, light, ultraviolet, X-rays, and gamma rays. All of these waves form part of the electromagnetic speRead more

    In physics, electromagnetic radiation consists of waves of the electromagnetic field, propagating through space, carrying electromagnetic radiant energy. It includes radio waves, microwaves, infrared, light, ultraviolet, X-rays, and gamma rays. All of these waves form part of the electromagnetic spectrum.

    See less
    • 0
Query Karo
  • 0
Query KaroQK#001
Asked: November 5, 2021In:
  • 0

Read less
  1. Nani Reddy
    Nani Reddy Bronze

    The key difference between Serial and Parallel Communication is that in serial communication data transmission occurs bit by bit at a time while in parallel communication multiple bits transmit at a time. ... Serial and parallel communication are two ways of transmitting data from the sender to receRead more

    The key difference between Serial and Parallel Communication is that in serial communication data transmission occurs bit by bit at a time while in parallel communication multiple bits transmit at a time. … Serial and parallel communication are two ways of transmitting data from the sender to receiver.

    See less
    • 0
Query Karo
  • 0
Query KaroQK#001
Asked: November 5, 2021In:
  • 0

Read less
  1. nagraju
    nagraju Silver

    Characteristics of JFET: The characteristics of JFET is defined by a plotting a curve between the drain current and drain-source voltage. The variation of drain current with respect to the voltage applied at drain-source terminals keeping the gate-source voltage constant is termed as its characterisRead more

    Characteristics of JFET: The characteristics of JFET is defined by a plotting a curve between the drain current and drain-source voltage. The variation of drain current with respect to the voltage applied at drain-source terminals keeping the gate-source voltage constant is termed as its characteristics.

    See less
    • 0
Query Karo
  • 0
Query KaroQK#001
Asked: November 5, 2021In:
  • 0

Read less
  1. nagraju
    nagraju Silver

    In electronics, crosstalk is any phenomenon by which a signal transmitted on one circuit or channel of a transmission system creates an undesired effect in another circuit or channel. Crosstalk is usually caused by undesired capacitive, inductive, or conductive coupling from one circuit or channel tRead more

    In electronics, crosstalk is any phenomenon by which a signal transmitted on one circuit or channel of a transmission system creates an undesired effect in another circuit or channel. Crosstalk is usually caused by undesired capacitive, inductive, or conductive coupling from one circuit or channel to another.

    See less
    • 0